3G-SDI Distribution Amplifier

The 4VDA  is SD/HD/3G-SDI re-clocking distribution amplifier.

All SDI format automatic input detection.


Spec :

- 1 SDI Input , 4 SDI Output.

- SD-SDI (270Mbps), HD-SDI (1.485Gbps), 3G-SDI (2.97Gbps) Input auto detect.

The figure above shows the SDI distribution amplifier board block diagram.



FPGA관련 정보, 영상 신호 이론, 하드웨어 관련 더 많은 정보는 하기 네이버 블로그에 있습니다. https://blog.naver.com/zaszas2345

HD-SDI to HDMI Video Converter

This board is SD-SDI and HD-SDI to HDMI Video Signal Converter.

If you don't have HD-SDI Monitor, you can use HDMI Monitor.

You can see HD-SDI signal by this board.

But, it is not support audio convert.

used gennum Deserializer, FPGA, TMDS Tx Chips to made this converter.

The above picture is saw block diagram.

It is support the above Formats.

If Input is 1080x60i HD-SDI, Ouput is 1080x60i HDMI signal. 

FPGA관련 정보, 영상 신호 이론, 하드웨어 관련 더 많은 정보는 하기 네이버 블로그에 있습니다. https://blog.naver.com/zaszas2345

HD-SDI Patten Generator

This board is HD-SDI, SD-SDI Video signal output Patten Generator.
I have made this board by FPGA and SDI transmitter.

FPGA Part : Altera CycloneIII(EP3C5E144C8N)

SDI Part     : Gennum GS2972

Output Format : 1920x1080x60i , 50i,  24Psf

                        720x486x59.94i , 720x576x50i

Power A,B        : A(USB +5V) ,  B(+12V Adapter)

This Board have various kinds HD-SDI Patten. ( Push SW-D)

If you push SW-B, this board move Auto Patten rotation.

So SW-A is 1Khz embedded audio On/Off switch.

FPGA관련 정보, 영상 신호 이론, 하드웨어 관련 더 많은 정보는 하기 네이버 블로그에 

있습니다. https://blog.naver.com/zaszas2345

3G-SDI VIDEO MONITOR BOARD

1. Introduction

This  Controller board  is 3G-SDI/HD-SDI/SD-SDI, HDMI, DVI, VGA, CVBS interface board for TFT LCD panel that is providing high quality screen image.

2. General Specification

-TFT LCD Panels of  640x480~1920x1200 resolutions. Up to 10bits.

-3G-SDI , HDMI, DVI, VGA, CVBS Video Input Support.

-3G-SDI 1Input & Active Loop Through 1 Output.

-CVBS signal NTSC, PAL standard.

-Support Full HD HDMI (with HDCP support)

-DVI input support up to 1920x1200 60Hz input signals.

-RGBHV input support VGA~WUXGA standard.

-Intergrated 3D Video Decoder(3D Adaptive Comb Filter)

-Per Pixel Motion Adaptive HD De-interlacing(MADI)

-10bit ,1920 x 1200 Panel support.

-10bit Video Data Image Processing.

3. Features

3G SDI Receiver

* 270Mbps/1.485Gbps/2.97Gbps(1.001, 1.000) Input Support.

* SMPTE-425M 1080 50/60P Level A Support.

HDMI Receiver

* HDMI Audio Support.

* HDCP Support.

DVI Receiver

* DVI input support up to 1920x1200 60Hz input signals.

RGB HV Receiver

* Support up to 1600x1200 75Hz Standard modes.

* Captures up to 195Mhz

Composite Receiver

* Intergrated 3D Video Decoder .

* Support NTSC, PAL

4. Support Input Modes

5. Specfications  

FPGA관련 정보, 영상 신호 이론, 하드웨어 관련 더 많은 정보는 하기 네이버 블로그에 있습니다. https://blog.naver.com/zaszas2345